be focused pro sound not going through headphones

Be focused pro sound not going through headphones driver#
Be focused pro sound not going through headphones manual#
Be focused pro sound not going through headphones download#
Be focused pro sound not going through headphones windows#

If you still cannot hear any playback sound, please download Settings File 2 and load it up in Saffire Control, ensuring that the sound from your computer is being played back either on channels 5/6 (Headphone output 1) or 7/8 (Headphone output 2).

(NB: Pressing the “S/CARD” button in Saffire Control will set each output pair’s crossfader to the extreme right position and route audio channels to their respective outputs on the Saffire, as outlined in the above 2 stages).

This is the horizontal slider in each output section, and it needs to be set to its right-hand position. In fact, the microphone on my headset functions perfectly when plugged in, but the headphones themselves are outputting no sound. The system recognizes that my headset is plugged in. However, when plugging my headphones into the 3.5mm headset jack, there is no sound whatsoever.

To hear the sound being played back from your computer you will need to ensure that the input/playback balance control is set to playback. Sound comes through perfectly fine on my laptop's built-in speakers.

Are you sending Audio to the correct outputs? The headphone outputs are outputs 5/6 (Headphone output 1) and outputs 7/8 (Headphone output 2).

Be focused pro sound not going through headphones manual#

Have you got your Saffire selected as the Audio Input/Output device on your computer and/or your software? If you are unsure, please consult the manual for the software that you are using.

If you can get sound out of your headphones from your inputs, but not from your computer, please go through the following steps: Have you checked your headphones on another device to confirm that they are not faulty?.If you still can’t hear anything, please download Settings File 1, and load it up in Saffire Control.You also need to ensure that the output is not dimmed or muted, that no other channels are soloed, and that the headphone output level is turned up on the front of your Saffire. If you can get sound out of your headphones from your inputs, but not from your computer, please go through the following steps: Have you got your Saffire PRO selected as the Audio Input/Output device on your computer and/or your software If you are unsure, please consult the manual for the software that you are using. It is worth noting at this stage that the headphone outputs are outputs 5/6 (Headphone output 1) and outputs 7/8 (Headphone output 2). If hardware control is turned on (the button marked “H” in each output section), the level in your Saffire software will be controlled by the “Monitor” control on the front of your Saffire. Please ensure that the output levels are all turned up sufficiently, both in the software and on the hardware.This should enable you to hear any audio entering the Saffire through the analogue inputs. All crossfaders will be in a central position and all of the inputs will be routed to all of the outputs. My wired headset has Bluetooth, why should I use it One side of my headset seems louder than the other side.

Be focused pro sound not going through headphones windows#

My microphone (mic) is not working / being detected in Windows 10. This will activate tracking (or recording) mode, where the Saffire outputs can be used to monitor a mix of inputs. My Game and Chat Audio Not Playing At The Same Time. If you cannot get any sound out of your headphones, either from the inputs, or playing back from a computer, please try the following steps:

Be focused pro sound not going through headphones driver#

I was thinking maybe it was a driver issue but testing on my own laptop has (different make model and audio driver) resulted in the same problem.Article Applies to: Legacy Saffire (white front) I also tried disabling the main speakers to try to force all audio to the earbuds, but when I tried that as a solution, the audio did not play at all. I have checked the sound settings and nothing seems to be out of place. I have verified the headphones are selected as the default play back device.

I have verified that the earbuds and headphone jack are working outside of call audio, in fact if the earbuds are plugged in, you can even hear the phone ring through the headphones, but when the call is answered, the call audio will only play through the laptop speakers other things play through the earbuds fine. I'm hoping someone out there is a mitel guru and can help me figure out why Call audio will not play through the user's headphones (ear buds).